www.globaldynamics.co.th 
Polarimeter Glass Tubes
Polarimeter Glass Tubes
1.) Glass tube without bubble trap
Glass sample tube for single measurements without bubble trap.
| ID-N°: 02595 | Length in mm: 100 Volume in ccm: 5,5 |
| ID-N°: 02596 | Length in mm: 200 Volume in ccm: 10,5 |
2.) Glass tubes with bubble trap
Glass tubes with bubble trap for single measurements. Filling through narrow end and short turnover after sealing prevents influence of air bubbles on measurement.
Glass tubes with bubble trap
| ID-N°: 02604 | Length in mm: 50 Volume in ccm: 8 |
| ID-N°: 02600 | Length in mm: 100 Volume in ccm: 10,5 |
| ID-N°: 02601 | Length in mm: 200 Volume in ccm: 16,3 |
3.) Glass tube with center filling cup
Glass tube with center filling cup for single measurements. The filling cup allows easy filling and emptying of the tube; Air bubbles escape through the filler opening when moved slightly.
Glass tube with center filling cup
| ID-N°: 02611 | Length in mm: 50 Volume in ccm: 3 |
| ID-N°: 02607 | Length in mm: 100 Volume in ccm: 6 |
| ID-N°: 02608 | Length in mm: 200 Volume in ccm: 12 |
For medical applications
| ID-N°: 02612 | Length in mm: 95,04 Volume in ccm: 5,5 |
| ID-N°: 02613 | Length in mm: 190,09 Volume in ccm: 11 |
4.) Micro tube for small sample volumes
Micro tube with internal diameter of 3 – 5 mm. For bubble-free filling use an injection syringe.
Micro tube for small sample volumes
| ID-N°: 09221 | Length in mm: 50 Volume in ccm: 0,55 |
| ID-N°: 09222 | Length in mm: 100 Volume in ccm: 1,1 |
5.) Quartz glass micro tube (thermostatable)
Quartz glass micro tube with hose connection for water circulation, thermostatable.
Quartz glass micro tube
| ID-N°: 08962 | Length in mm: 100 Volume in ccm: 1 |
6.) Accessories for quartz glass tubes and flow-through tubes
Accessories for quartz glass tubes and flow-through tubes You can find more information under the Tab “specifications“.
Accessories for quartz glass tubes and flow-through tubes
| ID-N°: 01811 | Cover glass for polarimeter tubes, ø 15,5 mm |
| ID-N°: 01813 | Elastic insert for polarimeter tubes, ø 15,5 mm |
| ID-N°: 01812 | Cover glass for polarimeter tubes, ø 23,7 mm |
| ID-N°: 01814 | Elastic insert for polarimeter tubes, ø 23,7 mm |
| ID-N°: 01838 | Cleaning brush for sample tubes |
| ID-N°: 01816 | Thermometer 0 bis 40 °C, 0,1 °C grating, for tubes with center filling cup |
| ID-N°: 08341 | Rubber stopper, with hole to insert thermometer |
| ID-N°: 02624 | Temperature sensor for automatic temperature correction for glass tubes with center filling cup (also available for old tubes), can be used with all new M- and H-series and new Saccharomat models |
